Validation of a Modified Procedure for the determination of Chemical Oxygen Demand using standard dichromate method in industrial wastewater samples with high calcium chloride content

Abstract

Background/ Objectives: Chemical Oxygen Demand (COD) is a widely used aggregate organic pollutant index in national discharge standards and is one of the critical parameters for water quality assessment. The conventional COD determination by wet oxidative method encounters the problem of chloride interference in water samples with high chloride content. The dichromate reflux method oxidizes 85-95% of organic matter and also 100% of chloride ions in the samples, without an appropriate chloride masking strategy. The standard method cannot measure COD accurately in samples containing more than 2000 mg L-1 chloride. The present study demonstrates and validates a modified procedure for the determination of COD in industrial sample with high calcium chloride content and low organic load. Method: Petrochemical industries manufacturing Propylene Oxide and Propylene Glycol via chlorohydrin route generate wastewater with high calcium chloride content. Due to high chloride content, the standard analysis method could not produce reliable data for COD values with known precision and accuracy. The standard method based on dichromate was modified, with an additional mixing step for a specified time to enhance the chloride masking by mercuric sulphate. Undiluted sample (20 mL) was mixed with the required amount of mercuric sulpahte to maintain 10:1 ratio to chloride content and 10 mL of sulphuric acid at 150-175 RPM for 20 minutes at room temperature to increase the contact time/ chloride masking. Method validation attributes of the modified procedure were assessed and found to be complying with the acceptance criteria. Findings: We developed a modified procedure for the standard dichromate based chemical oxygen demand (COD) determination in industrial wastewater samples rich in calcium chloride. An additional mixing step is introduced in the standard procedure to enhance the chloride masking with mercuric sulphate in samples containing high chloride. The amended procedure resulted in accurate COD values in samples with low organic load, rich in calcium chloride and the modified https://www.indjst.org/ 2391 Gnanavelu et al. / Indian Journal of Science and Technology 2021;14(29):2391-2399 method was successfully validated. Novelty: The modified procedure with mixing step to enhance chloride masking was found to be satisfactory for determining COD in calcium chloride-rich industrial effluent.