Enhancing Physiochemical Substrate Properties of Thin-Film Composite Membranes for Water and Wastewater Treatment via Engineered Osmosis Process

4Citations
Citations of this article
33Readers
Mendeley users who have this article in their library.

Abstract

The commercial thin-film composite (TFC) nanofiltration (NF) membrane is unsuitable for engineered osmosis processes because of its thick non-woven fabric and semi-hydrophilic substrate that could lead to severe internal concentration polarization (ICP). Hence, we fabricated a new type of NF-like TFC membrane using a hydrophilic coated polyacrylonitrile/polyphenylsulfone (PAN/PPSU) substrate in the absence of non-woven fabric, aiming to improve membrane performance for water and wastewater treatment via the engineered osmosis process. Our results showed that the substrate made of a PAN/PPSU weight ratio of 1:5 could produce the TFC membrane with the highest water flux and divalent salt rejection compared to the membranes made of different PAN/PPSU substrates owing to the relatively good compatibility between PAN and PPSU at this ratio. The water flux of the TFC membrane was further improved without compromising salt rejection upon the introduction of a hydrophilic polydopamine (PDA) coating layer containing 0.5 g/L of graphene oxide (PDA/GO0.5) onto the bottom surface of the substrate. When tested using aerobically treated palm oil mill effluent (AT-POME) as a feed solution and 4 M MgCl2 as a draw solution, the best performing TFC membrane with the hydrophilic coating layer achieved a 67% and 41% higher forward osmosis (FO) and pressure retarded osmosis (PRO) water flux, respectively, compared to the TFC membrane without the coating layer. More importantly, the coated TFC membrane attained a very high color rejection (>97%) during AT-POME treatment, while its water flux and reverse solute flux were even better compared to the commercial NF90 and NF270 membranes. The promising outcomes were attributed to the excellent properties of the PAN/PPSU substrate that was coated with a hydrophilic PDA/GO coating and the elimination of the thick non-woven fabric during TFC membrane fabrication.

References Powered by Scopus

Enabling graphene oxide nanosheets as water separation membranes

1314Citations
N/AReaders
Get full text

Mussel-inspired modification of a polymer membrane for ultra-high water permeability and oil-in-water emulsion separation

660Citations
N/AReaders
Get full text

Influence of membrane support layer hydrophobicity on water flux in osmotically driven membrane processes

430Citations
N/AReaders
Get full text

Cited by Powered by Scopus

Current State-of-the-Art of Non-Reverse Osmosis-Like Forward Osmosis Technology

5Citations
N/AReaders
Get full text

The impacts of 2D graphene oxide on selective and substrate layer of TFC membrane: A critical review on fabrication techniques and performance in water treatment

5Citations
N/AReaders
Get full text

The effect of PEG-content and molecular weight of PEG-PPG-PEG block copolymers on the structure and performance of polyphenylsulfone ultra- and nanofiltration membranes

3Citations
N/AReaders
Get full text

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Cite

CITATION STYLE

APA

Abdullah, W. N. A. S., Mohd Nawi, N. S., Lau, W. J., Ho, Y. C., Aziz, F., & Ismail, A. F. (2023). Enhancing Physiochemical Substrate Properties of Thin-Film Composite Membranes for Water and Wastewater Treatment via Engineered Osmosis Process. Polymers, 15(7). https://doi.org/10.3390/polym15071665

Readers' Seniority

Tooltip

PhD / Post grad / Masters / Doc 5

71%

Lecturer / Post doc 1

14%

Researcher 1

14%

Readers' Discipline

Tooltip

Chemical Engineering 4

44%

Chemistry 2

22%

Agricultural and Biological Sciences 2

22%

Engineering 1

11%

Article Metrics

Tooltip
Mentions
News Mentions: 1

Save time finding and organizing research with Mendeley

Sign up for free