The presented paper describes a novel process using inkjet printing to pattern a conformal (built-on) mask onto photoresist for further microstructure formation. The advantages of using the inkjet printing conformal mask include no Cr photomask required, suitable for non-planar substrate, scalable for large area, and extreme low cost. The ink is ejected from the inkjet print-head controlled by the inkjet system. A CAD pattern from the designer can use this process to place the pattern ink onto the photoresist substrate. A conformal mask (made of ink) was directly built-on the photoresist substrate. The dried ink thickness has to be more than 1.8 μm thick as UV absorber. Following UV exposure, development, and ink removal, the designed microstructure patterns can be realized in photoresist such as microchannels and micro-columns. © 2008 Springer-Verlag.
CITATION STYLE
Lin, C. H., Yang, H., Chang, F. Y., Chang, S. H., & Yen, M. T. (2008). Fast patterning microstructures using inkjet printing conformal masks. In Microsystem Technologies (Vol. 14, pp. 1263–1267). https://doi.org/10.1007/s00542-007-0521-z
Mendeley helps you to discover research relevant for your work.