We present an autonomous sensor to measure soil water content that uses a single heat pulse probe based on a transistor encapsulated in a porous block. The sensor uses a bipolar junction transistor, which performs as both a heating and temperature-sensing element. Since the sensor depends on a porous block to measure the matric potential of the soil, it does not suffer from accuracy problems if the contact between the probe and the soil is not perfect. A prototype of the sensor showed a temperature variation of ΔT = 2.9 °C when the porous ceramic was saturated with water. The sensor presented an almost linear behavior for small changes in the matric potential of a red latosol when tested in the 1-kPa and 35-kPa pressure range, showing a sensitivity of S = 0.015 °C/kPa. The ultra-low power signal conditioning circuit can read the sensor's temperature with a resolution of approximately 0.02 °C, so the matric potential can be read in increments of at least 1.33 kPa. When powered only by a 2-F supercapacitor from the energy-harvesting system, the interrogation circuit is able to take one soil water content measurement per day, for eleven days.
CITATION STYLE
Carvalhaes-Dias, P., Morais, F. J. O., Duarte, L. F. C., Cabot, A., & Dias, J. A. S. (2019). Autonomous soilwater content sensors based on bipolar transistors encapsulated in porous ceramic blocks. Applied Sciences (Switzerland), 9(6). https://doi.org/10.3390/app9061211
Mendeley helps you to discover research relevant for your work.