The aim of this study is to investigate the stationarity of the electromyographic (EMG) signals during isokinetic exertions of the trunk muscle. Six healthy subjects participated in this study. The erector spinae muscles were used to collect the signals. In order to simulate the isokinetic exercises of the trunk, a Cybex system with a trunk modular component was used. All subjects performed sustained exertions with a combination of load (25%, 50% MVC) and angular velocity (0, 15, 30 degree/s). The stationarity of the signals was tested by the reverse arrangements test and modified reverse arrangements test. In the results, the signal stationarity was high in all conditions in the reverse arrangements test. However, in the modified reverse arrangements test it was relatively low at about the 30 degree/s angular velocity. In the analysis of variance, the effect of angular velocity was statistically significant at the 0.05 significance level in the modified reverse arrangements test and Tukey's HSD grouping showed that the stationarity of 30 degree/s angular velocity was significantly different from 0, 15 degree/s condition. These results indicate that the stationarity of the EMG signals showed no difference between isometric and isokinetic conditions when the angular velocity was equal to 15 degree/s. © 2012 - IOS Press and the authors. All rights reserved.
CITATION STYLE
Cho, Y. J., & Kim, J. Y. (2012). Stationarity test of electromyographic signals during isokinetic trunk exertions. In Work (Vol. 41, pp. 2545–2548). https://doi.org/10.3233/WOR-2012-0496-2545
Mendeley helps you to discover research relevant for your work.