Optimization of Turning Process By Using Taguchi Method

  • Akkuş H
  • YAKA H
N/ACitations
Citations of this article
22Readers
Mendeley users who have this article in their library.

Abstract

In this study, AISI 1040 steel is machined on CNC lathes. Taguchi L16 ortogonal array was used as experimental design. Experiments were carried out with selected the three cutting parameters. These parameters were determined as feed rate, cutting speed and cutting depth. Turning operation was carried out in dry conditions with diamond cutting tools. At the end of experiments, the values of surface roughness (Rz) on samples were found. Signal/Noise (S/N) rates were found with using the Taguchi method. According to the results, feed rate had the most significant effect on Rz among three factors. In ANOVA analysis, respectively feed rate, cutting depth and cutting speed are effective at 95% confidence level at Rz value. In repetition experiments carried out for parameters chosen in Taguchi prediction, it was identified that Taguchi works with nearly 94% accuracy.

Cite

CITATION STYLE

APA

Akkuş, H., & YAKA, H. (2018). Optimization of Turning Process By Using Taguchi Method. Sakarya University Journal of Science, 22(5), 1444–1448. https://doi.org/10.16984/saufenbilder.409502

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free