The load-bearing capacity of a rod of a tubular anchor of a friction type (friction-type anchor) is determined by the nature of its interaction with the walls of the hole. The preliminary (estimated) calculation of this indicator is difficult because of the lack of information about the deformed state of the rod. The proposed interaction scheme assumes coupling only over a part of the cross-sectional profile. Force factors are represented by concentrated and distributed loads. On the basis of accepted assumptions, a mathematical model which indicates rod-hole force interaction is formed. The determination of the parameters characterizing the adopted interaction scheme is based on the solution of the obtained nonlinear equations. The physical simulation of the process of installing the anchor in the borehole model was performed. The accepted scheme of interaction of a rod - borehole is experimentally confirmed. The results of numerical simulation have large convergence with experimental data.
CITATION STYLE
Zubkov, A. A., Kutlubaev, I. M., & Muhamedjarova, M. S. (2019). Calculation of Load-bearing Capacity of Tubula Anchor of Friction Type. In IOP Conference Series: Earth and Environmental Science (Vol. 272). Institute of Physics Publishing. https://doi.org/10.1088/1755-1315/272/2/022052
Mendeley helps you to discover research relevant for your work.