Reactivity Investigation on Iron-Titanium Oxides for a Moving Bed Chemical Looping Combustion Implementation

Abstract

Ilmenite-type natural ore which is constituted mainly of iron-titanium oxide is an interesting candidate as an oxygen carrier in chemical looping combustion (CLC) process. Its reactivity was investigated using methane as reducing gas and air as oxidizing gas. Experiments were carried out in a coupled thermogravimetric-thermo differential analyzer (TGA-DTA). When temperature increases from 700˚C to 1000˚C, the reaction rate increases by 50 times while the oxygen transfer capacity passes from 1.8% to 12%. TG-DT analyses showed that the overall mass loss due to ilmenite reduction reached at most 12%. It corresponds to 87% of theoretical mass loss due to the transformation of Fe 2 TiO 5 into Fe and TiO 2 . It is established that the reduction for the iron-titanium oxides occurs in two steps: Fe 2 TiO 5  FeTiO 3  Fe + TiO 2 . The titanium reduction from the state TiO 2 to the stage Ti 3 O 5 was observed as well. This behavior is sup-ported by XRD analysis. Subsequent oxidation of the reduced mineral led to recover the starting oxide. The stability of iron-titanium oxides was established over 35 looping cycles of oxidation-reduction, with an increase of 5% of oxygen transfer capacity and reactivity in the first 5 cycles and after that, ilmenite reactivity remained constant. At high tem-peratures, catalytic effect of ilmenite on methane decomposition leading to carbon deposition is observed. The depos-ited carbon participates in the reactivity of the oxide.