Biofiltration of air contaminated by styrene vapors on inorganic filtering media: An experimental study

5Citations
Citations of this article
7Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

This paper presents a study on the biofiltration of styrene by using two inorganic filtering materials. The effects of styrene inlet load and nitrogen concentration present in the nutrient solution on biofilter performance were studied. The styrene inlet concentration was varied from 65 to 1115 parts per million by volume (ppmv), whereas the contaminated airflow rate was fixed at 1 m3/hr. The nitrogen concentration in nutrient solution was varied from 1 to 4 gN/L. The maximum elimination capacity obtained was 105 g/m 3-hr, which corresponded to a removal efficiency of 80% for a styrene inlet load of 130 g/m3-hr. This study shows that the nitrogen content in the nutrient solution affects the removal rate of styrene, with an optimal nitrogen concentration of 3 gN/L. The performance comparison between two different inorganic bed types was undertaken and a comparative study on biofiltration of two aromatic compounds, styrene and toluene, is also presented. Copyright 2009 Air & Waste Management Association.

Cite

CITATION STYLE

APA

St-Pierre, M. C. D., Ramirez, A. A., & Heitz, M. (2009). Biofiltration of air contaminated by styrene vapors on inorganic filtering media: An experimental study. Journal of the Air and Waste Management Association, 59(5), 568–578. https://doi.org/10.3155/1047-3289.59.5.568

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free