Experimental study of water droplet break up in water in oil dispersions using an apparatus that produces localized pressure drops

10Citations
Citations of this article
22Readers
Mendeley users who have this article in their library.

Abstract

Oil production facilities have choke/control valves to control production and protect downstream equipment against over pressurization. This process is responsible for droplets break up and the formation of emulsions which are difficult to treat. An experimental study of water in oil dispersion droplets break up in localized pressure drop is presented. To accomplish that, an apparatus simulating a gate valve was constructed. Droplet Size Distribution (DSD) was measured by laser light scattering. Oil physical properties were controlled and three different break up models were compared with the experimental results. All experimental maximum diameters (d max ) were above Kolmogorov length scale. The results show that d max decreases with increase of energy dissipation rate (ϵ) according to the relation d max ∝ ϵ -0.42 . The Hinze (1955, AIChE J.1, 3, 289-295) model failed to predict the experimental results, although, it was able to adjust reasonably well those points when the original proportional constant was changed. It was observed that increasing the dispersed phase concentration increases d max due to turbulence suppression and/or coalescence phenomenon. Turbulent viscous break up model gave fairly good prediction.

Cite

CITATION STYLE

APA

Silva, F. S., Medronho, R. A., & Barca, L. F. (2019). Experimental study of water droplet break up in water in oil dispersions using an apparatus that produces localized pressure drops. Oil and Gas Science and Technology, 74. https://doi.org/10.2516/ogst/2018079

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free