Improved real-time bio-aerosol classification using artificial neural networks

19Citations
Citations of this article
34Readers
Mendeley users who have this article in their library.

Abstract

Air pollution has had an increasingly powerful impact on the everyday life of humans. More and more people are aware of the health problems that may result from inhaling air which contains dust, bacteria, pollens or fungi. There is a need for real-time information about ambient particulate matter. Devices currently available on the market can detect some particles in the air but cannot classify them according to health threats. Fortunately, a new type of technology is emerging as a promising solution. Laser-based bio-detectors are characterizing a new era in aerosol research. They are capable of characterizing a great number of individual particles in seconds by analyzing optical scattering and fluorescence characteristics. In this study we demonstrate the application of artificial neural networks (ANNs) to real-time analysis of single-particle fluorescence fingerprints acquired using BARDet (a Bio-AeRosol Detector). A total of 48 different aerosols including pollens, bacteria, fungi, spores, and nonbiological substances were characterized. An entirely new approach to data analysis using a decision tree comprising 22 independent neural networks was discussed. Applying confusion matrices and receiver operating characteristics (ROC) analysis the best sets of ANNs for each group of similar aerosols were determined. As a result, a very high accuracy of aerosol classification in real time was achieved. It was found that for some substances that have characteristic spectra, almost each particle can be properly classified. Aerosols with similar spectral characteristics can be classified as specific clouds with high probability. In both cases the system recognized aerosol type with no mistakes. In the future, it is planned that performance of the system may be determined under real environmental conditions, involving characterization of fluorescent and nonfluorescent particles.

Figures

  • Table 1. Configuration of bands in the multichannel PMT. 96 97
  • Table 2. List of all substances used in experiment. 112 113
  • Figure 1. Setup of aerosol generation, data recording and analysis. 116 117 3.1.3. Data acquisition method and pre-processing 118 The fluorescence of each particle was recorded in 7 bands. It creates a time series of the signals 119 which has to be pre-processed before further analysis. There are two steps of gathering data. First 120 one is performed by internal BARDet’s software, which is responsible for controlling the instrument 121 and the acquisition of raw signals. Then data is forwarded to a pre-processing module of analysis 122 software. Its first task is to extract valuable signals from the noise (three sigma rule). Then a 123 normalization procedure is required. It is realized first by subtracting the average value of signal and 124 then it normalizing to its standard deviation. The main goal was to analyze shape of emission 125 spectrum (not signal strength). 126
  • Figure 3. Typical topology of artificial neural network. 155 156 The described algorithm is the supervised learning method that requires training data for a 157 teaching process. This allows one to calculate an error between the showed target and the ANN 158 response. Every problem is related to minimizing output error which is calculated as Mean Squared 159 Error (3). 160
  • Figure 4. Model of backward error propagation. 168
  • Figure 5. Example of error minimizing during training process. 181
  • Table 3. Structure of confusion matrix. 223
  • Figure 6. ROC graph with an example of classifier (blue). 237

References Powered by Scopus

Principles of fluorescence spectroscopy

20462Citations
N/AReaders
Get full text

An introduction to ROC analysis

16205Citations
N/AReaders
Get full text

Health effects of fine particulate air pollution: Lines that connect

4576Citations
N/AReaders
Get full text

Cited by Powered by Scopus

Recent Advances in Monitoring, Sampling, and Sensing Techniques for Bioaerosols in the Atmosphere

44Citations
N/AReaders
Get full text

Study on polarization scattering applied in aerosol recognition in the air

32Citations
N/AReaders
Get full text

Airborne transmission of biological agents within the indoor built environment: a multidisciplinary review

18Citations
N/AReaders
Get full text

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Cite

CITATION STYLE

APA

Leśkiewicz, M., Kaliszewski, M., Włodarski, M., Młyńczak, J., Mierczyk, Z., & Kopczyński, K. (2018). Improved real-time bio-aerosol classification using artificial neural networks. Atmospheric Measurement Techniques, 11(11), 6259–6270. https://doi.org/10.5194/amt-11-6259-2018

Readers over time

‘18‘19‘20‘21‘22‘24‘250481216

Readers' Seniority

Tooltip

PhD / Post grad / Masters / Doc 12

60%

Researcher 7

35%

Professor / Associate Prof. 1

5%

Readers' Discipline

Tooltip

Earth and Planetary Sciences 5

28%

Environmental Science 5

28%

Computer Science 4

22%

Engineering 4

22%

Save time finding and organizing research with Mendeley

Sign up for free
0