Statistical optimization for cadmium removal using Ulva fasciata biomass: Characterization, immobilization and application for almost-complete cadmium removal from aqueous solutions

Abstract

Cadmium is a global heavy metal pollutant. Marine green algae were used as efficient, low cost and eco-friendly biosorbent for cadmium ions removal from aqueous solutions. Plackett-Burman design was applied to determine the most significant factors for maximum cadmium removal from aqueous solutions using dry Ulva fasciata biomass. The most significant factors affecting cadmium removal process were further optimized by the face centered central composite design. The results indicated that 4 g of dry Ulva fasciata biomass was found to successfully remove 99.96% of cadmium from aqueous solution under the conditions of 200 mg/L of initial cadmium concentration at pH 5, 25 °C for 60 min of contact time with static condition. Dry Ulva fasciata biomass samples before and after cadmium biosorption were analyzed using SEM, EDS and FTIR. Furthermore, the immobilized biomass in sodium alginate-beads removed 99.98% of cadmium from aqueous solution at an initial concentration of 200 mg/L after 4 h which is significantly higher than that for control using sodium alginate beads without incorporation of the algal biomass (98.19%). Dry biomass of Ulva fasciata was proven to be cost-effective and efficient to eliminate heavy metals especially cadmium from aquatic effluents and the process is feasible, reliable and eco-friendly.