Hesperaloe funifera as a raw material for integral utilization of its components

Abstract

Hesperaloe funifera was characterized in terms of its contents of holocellulose, α-cellulose, and lignin (74.1, 52.3, and 7.9%, respectively). Also, an experimental factor design was used to examine the influence of operational variables in the diethanolamine pulping of this material (viz. diethanolamine concentration (50-80%), cooking temperature (155-185 °C), and time (30-90 minutes)) on the contents of holocellulose, α-cellulose, and lignin, as well as the yield, kappa number, and viscosity of the resulting pulps, and also on the brightness, tensile index, stretch, burst index, and tear index of paper sheets made from it. The predictions for these dependent variables departed by less than 1, 7, 6, 2, 2, 4, 15, 11, 12, 10, and 37% from their respective experimental values. Black liquors obtained from the pulping runs were characterized by determining pH, density, TDS, (total dissolved solids), MI (inorganic matter), MO (organic matter), and lignin content; lignin samples were characterized by different techniques (FTIR and TGA). Finally, the black liquors were acidified to separate solid fractions that were subjected to pyrolysis and gasification in order to obtain synthesis and fuel gases.