Effect of Cr, Mo, and V Elements on the Microstructure and Thermal Fatigue Properties of the Chromium Hot-Work Steels Processed by Selective Laser Melting

Abstract

Thermal fatigue is the main failure mode for chromium hot-work steels. In this study, pre-alloyed chromium hot-work steel powders with three different Cr, Mo, and V addition levels (low content (LH), medium content (MH), and high content (HH)) were used for selective laser melting (SLM). The microstructure and thermal fatigue properties of these SLM-processed materials were investigated. After thermal fatigue tests, LH possessed the lowest hardness (approximately 573 HV5) and longest crack length, MH possessed the highest hardness (approximately 688 HV5) and HH (with the hardness of approximately 675 HV5) possessed the shortest crack length. It can be concluded that the increase of V content in MH is the main reason for the refined grains which result in an enhanced hardness and thermal fatigue resistance compared to LH. The further increase of the Cr and Mo content in HH leads to the grain coarsening and hardness decreasing, which is supposed to degrade the TF resistant properties according to the conventional theory. However, HH exhibited an enhanced thermal fatigue resistance compared to MH. That is because the higher stored energy in MH deteriorated its thermal fatigue resistance compared to HH.