Sputter Epitaxial Growth of Flat Germanium Film with Low Threading-Dislocation Density on Silicon (001)

  • Yeh W
  • Matsumoto A
  • Sugihara K
  • et al.
13Citations
Citations of this article
15Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

Fast epitaxy of Ge on Si(001) was realized by DC sputtering at 2.1 nm · s-1 and 360°C; the resulting film was optically flat without a cross-hatch structure. After annealing at 700°C, 90°-full-edge dislocations dominated the Ge-Si interface and the threadingdislocation density (TDD) of the Ge film was below 104 cm-2, which is three orders of magnitude lower than the value of Ge films prepared by other methods. The extremely low TDD might be attributable to the spaces vacated by desorbed Ar within the film that served as dislocation sinks during sputtering. Acceptor-band conduction, which was at 0.02 eV above the valence band and was induced by dislocations, was observed with a hole mobility of 3-10 cm 2 ·V-1 · s-1 in the film prepared without annealing. After annealing at 700°C, the ionized-defect scattering in the film was considerably decreased and a mobility of 1180 cm2 ·V-1 · s-1 was obtained. The direct band gap energy of the film prepared without annealing was 0.81 eV, and became 0.79 eV after annealing. © The Author(s) 2014.

Cite

CITATION STYLE

APA

Yeh, W., Matsumoto, A., Sugihara, K., & Hayase, H. (2014). Sputter Epitaxial Growth of Flat Germanium Film with Low Threading-Dislocation Density on Silicon (001). ECS Journal of Solid State Science and Technology, 3(10), Q195–Q199. https://doi.org/10.1149/2.0091410jss

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free