Deuterium supersaturated surface layer in tungsten: ion energy dependence

Abstract

Properties of deuterium (D) supersaturated surface layers (DSSLs) formed in tungsten (W), such as thickness, internal microstructures, and D retention, are experimentally investigated as a function of the incident ion energy, E i. W samples were exposed to D plasmas in the PISCES-A linear plasma device in a range of E i ∼ 45-175 eV, while other plasma exposure parameters were fixed: sample temperature, T s, ∼423 K, ion flux, Γi, ∼1.2 × 1021 m−2s−1, and fluence, Φi, ∼3.0 × 1024 m−2. High-resolution, cross-sectional, transmission electron microscopy observations confirm that (1) a DSSL forms even at the lowest E i ∼ 45 eV, (2) the DSSL thickness, Δt DSSL, is found to decrease with decreasing E i from ∼11-12 nm at E i ∼ 175 eV to ∼5-6 nm at ∼45 eV, and to agree with approximately the maximum implantation depth calculated using SDTrimSP, and (3) high-density D nanobubbles with a diameter of ∼1 nm or less exist inside the DSSL, which is deemed to validate a theory-predicted vacancy stabilization process due to trapping of a solute D atom(s). Utilizing a D areal density of ∼4.2 × 1019 m−2 in the first 14 nm from the surface at E i ∼ 75 eV from nuclear reaction analysis and the measured E i dependence of Δt DSSL, our previous laser-induced breakdown spectroscopy data is updated: both dynamic and static D retention increase with decreasing E i, and the D/W atomic fraction during plasma exposure reaches ∼0.3 at E i ∼ 45 eV. A possible DSSL formation mechanism is proposed.