Effect of Turbine Weight on the Seismic Response of a Wind Turbine-Monopile System Located in Liquefied Multilayer Soil

Abstract

The core objectives of sustainable development are to develop access to renewable, sustainable, reliable, and cost-effective resources. Wind is an essential source of renewable energy, and monopile wind turbines are one method proposed for harnessing wind power. Offshore wind turbines can be vulnerable to earthquakes and liquefaction. This numerical study defined the effects of wind turbine weight on the seismic response of a wind turbine-monopile system located in liquefied multilayered soil with layer thicknesses of 5, 10, 15, and 20 m using four far-field records. OpenSees PL analysis indicated that if the liquefied sand had a lower density or a thickness of more than 10 m, then an increase in the earthquake acceleration beyond 0.4 g caused the pile to float like liquefied soil and to lose its vertical bearing capacity. Moreover, increasing the wind turbine power from 2 to 5 kW had no significant effect on the soil-structure interaction response. As the earthquake acceleration increased, the bending moment of the pile-column also increased as long as liquefaction did not occur and the pile-column deformation remained rotational-spatial in shape. As the acceleration and liquefaction increased and the pile began to float in response to its transverse motion, there was no significant difference in the pile-column displacement along the length, but there was a decrease in the pile-column bending moments. As this phenomenon increased and the pile continued to float, transformation of the pile increased the difference between the displacement of the pile-column along its length and further increased the bending moments. These results were derived from multiple correlation analysis, the bending moment relations, and lateral displacement of the pile-column of the wind turbine.