Particulate Matter in an Urban–Industrial Environment: Comparing Data of Dispersion Modeling with Tree Leaves Deposition

Abstract

Particulate matter represents a serious hazard to human health, and air quality models contribute to the understanding of its dispersion. This study describes particulate matter with a ≤10 μm diameter (PM10) dynamics in an urban–industrial area, through the comparison of three da-tasets: modeled (TAPM—The Air Pollution Model), measured concentration (environmental control stations—ECS), and leaf deposition values. Results showed a good agreement between ECS and TAPM data. A steel plant area was used as a PM10 emissions reference source, in relation to the four sampling areas, and a distance/wind-based factor was introduced (Steel Factor, SF). Through SF, the three datasets were compared. The SF was able to describe the PM10 dispersion values for ECS and leaf deposition (r2 = 0.61–0.94 for ECS; r2 = 0.45–0.70 for leaf); no relationship was found for TAPM results. Differences between measured and modeled data can be due to discrepancies in one district and explained by a lack of PM10 inventory for the steel plant emissions. The study suggests the use of TAPM as a suitable tool for PM10 modeling at the urban scale. Moreover, tree leaves are a low-cost tool to evaluate the urban environmental quality, by providing information on whether and when data from leaf deposition can be used as a proxy for air pollution concentration. Further studies to include the re-suspension of particles as a PM10 source within emission inventories are suggested.