Computational simulation of pacifier deformation and interaction with the palate

Abstract

Objectives: The objective of this study is to demonstrate that computational finite element models can be used to reliably simulate dynamic interaction between a pacifier, the palate, and the tongue during nonnutritive sucking (NNS). The interactions can be quantified by the results of finite element analyses which include deformation, strain, stress, contact force, and contact area. Materials and Methods: A finite element model was created based upon CAD solid models of an infant pacifier and palate. The silicone pacifier bulb is represented by a hyperelastic constitutive law. Contact surfaces are defined between the pacifier and palate. A time and spatially varying pressure load is applied to the bulb representing peristaltic interaction with the tongue. A second time-varying, periodic pressure representing NNS is applied to the model simultaneously. A large displacement, nonlinear transient dynamic analysis is run over two NNS cycles. Results: Results from the finite element analysis show the deformed shape of the bulb with maximum principal elastic strain of 0.23 and a range of maximum principal stress on the palate from 0.60 MPa (tensile) to −0.27 MPa (compressive) over the NNS cycles. The areas of contact between the pacifier and the palate are shown in surface contour plots. Conclusions: A nonlinear transient dynamic finite element model can simulate the mechanical behavior of a pacifier and its interaction with the tongue and contact with the palate subject to NNS. Quantitative results predicting deformation, strain, stress, contact force, and contact area can be used in comparative studies to provide insight on how pacifiers cause changes in dental, orthognathic, and facial development.