The resistive network model of the weft-knitted strain sensor with the plating stitch under static relaxation is studied based on the knitted loop structure and circuit principle. The prepared sensors are divided into the sensing area and the non-sensing area. The former consists of the conductive face yarn and the insulated elastic ground yarn, while the latter includes the normal face yarn and the same ground yarn. The loop of conductive face yarn not only produces length-related resistance but also causes the jamming contact resistances along the width and length direction. Besides, the elastic ground yarn has a potential impact on the contact situation of the conductive face yarn at the interlocking point, determining whether the interlocking contact resistance exists. Therefore, two resistive network models have been established accordingly. In addition to the length-related resistance, the first model focused on both the jamming and interlocking contact resistances, while the second one only dealt with the jamming contact resistance. In the case of applying voltage along the two ends of the course, the theoretical calculations of the corresponding network models were performed using a series of equivalent transformations. Finally, the correctness and usability of the two models were verified through experiments and model calculations. It was found that both models can predict that the equivalent resistance increases with the conductive wale number and decreases with the conductive course number. It was implied that the first model’s calculating resistances are closer to the experimental data and lower than those of the second model. The difference in the calculating resistances of the two models would become smaller as the course number increases. Thus, the investigation indicates that the jamming contact resistance has a more considerable influence on the resistive network than the interlocking contact resistance.
CITATION STYLE
Zhang, Y., & Long, H. (2020). Resistive network model of the weft-knitted strain sensor with the plating stitch-Part 1: Resistive network model under static relaxation. Journal of Engineered Fibers and Fabrics, 15. https://doi.org/10.1177/1558925020944563
Mendeley helps you to discover research relevant for your work.