A review of the development of three generations of small diameter silicon carbide fibres

Abstract

Three generations of small diameter ceramic fibres based on polycrystalline silicon carbide have been developed over a period of thirty years. This has been possible due to studies into the relationships between the microstructures and properties of the fibres. A variety of techniques have been employed by research teams on three continents. The fibres are made by the conversion of polymer precursors to ceramic fibres and all three generations are presently produced commercially. The nature of the precursor and the techniques used for cross-linking have been varied in order to optimise both properties and cost of manufacture. It has been possible to improve the characteristics of the fibres as the processes involved in the cross-linking of the precursor fibres have been better understood and the mechanisms governing both room temperature and high temperature behaviour determined. The result is that, although first generation fibres were limited by a low Young's modulus at room temperature and by creep and instability of the structure at temperatures far lower than those limiting the behaviour of bulk silicon carbide, the third generation fibres shows many of the characteristics of stoichiometric silicon carbide. This remarkable improvement in characteristics has been due to a thorough understanding of the materials science governing the behaviour of these fibres which are reinforcements for ceramic matrix composite materials. © 2006 Springer Science + Business Media, Inc.