We present the effects of oxygen on the irreversible bonding of a microchannel using an ultraviolet (UV) curable material of polyurethane acrylate (PUA). Microchannels were fabricated by bonding a top layer with impressions of a microfluidic channel and a bottom layer consisting of a PUA coating on a glass or a polyethylene terephthalate (PET) film substrate. The resulting channel is a homogeneous conduit of the PUA material. To find optimal bonding conditions, the bottom layer was cured under different oxygen concentration and UV exposure time at a constant UV intensity (10 mW cm-2). Our experimental and theoretical studies revealed that the channel bonding is severely affected by the concentration of oxygen either in the form of trapped air or permeated air out of the channel. In addition, an optimal UV exposure time is needed to prevent clogging or non-bonding of the channel. © The Royal Society of Chemistry.
CITATION STYLE
Jeong, H. E., & Suh, K. Y. (2008). On the role of oxygen in fabricating microfluidic channels with ultraviolet curable materials. Lab on a Chip, 8(11), 1787–1792. https://doi.org/10.1039/b810348h
Mendeley helps you to discover research relevant for your work.