Sampling rate reduction for 60 GHz UWB communication using compressive sensing

Abstract

60 GHz ultra wide-band (UWB) communication is an emerging technology for high speed short range communications. However, the requirement of high-speed sampling increases the cost of receiver circuitry such as analog-to-digital converter (ADC). In this paper, we propose to use a compressive sensing framework to achieve a significant reduction of sampling rate. The basic idea is based on the observation that the received signals are sparse in the time domain due to the limited multipath effects at 60 GHz wireless transmission. According to the theory of compressive sensing, by carefully designing the sensing scheme, sub-Nyquist rate sampling of the sparse signal still enables exact recovery with very high probability. We discuss an implementation for a low-speed A/D converter for 60 GHz UWB received signal. Moreover, we analyze the bit error rate (BER) performance for BPSK modulation under RAKE reception. Simulation results show that in the single antenna pair system model, sampling rate can be reduced to 2.2% with 0.3dB loss of BER performance if the input sparsity is less than 1%. Consequently, the implementation cost of ADC is significantly reduced. © 2009 IEEE.