Applying traffic merging to datacenter networks

Abstract

The problem of reducing energy usage in datacenter networks is an important one. However, we would like to achieve this goal without compromising throughput and loss characteristics of these networks. Studies have shown that data-center networks typically see loads of between 5% - 25% but the energy draw of these networks is equal to operating them at maximum load. To this end we examine the problem of reducing the energy consumption of datacenter networks by merging traffic. The key idea is that low traffic from N links is merged together to create K ≤ N streams of high traffic. These streams are fed to K switch interfaces which run at maximum rate while the remaining interfaces are switched to the lowest possible rate. We show that this merging can be accomplished with minimal latency and energy costs (less than 0.1W total) while simultaneously allowing us a deterministic way of switching link rates between maximum and minimum. We examine the idea of traffic merging using three different datacenter networks flattened butterfly, mesh and hypercube networks. In addition to analysis, we simulate these networks and utilizing previously developed traffic models we show that 49% energy savings are obtained for 5% per-link load while we get 20% savings for a 50% load for the flattened butterfly and somewhat lower savings are obtained for the other two networks. The packet losses are statistically insignificant and the maximum latency increase is less than 3μs. The results show that energy-proportional datacenter networks are indeed possible. © 2012 ACM.