Abstract
This letter describes a gate-first AlGaN/GaN high-electron mobility transistor (HEMT) with a W/high- k dielectric gate stack. In this new fabrication technology, the gate stack is deposited before the ohmic contacts, and it is optimized to stand the 870 °C ohmic contact annealing. The deposition of the W/high-k dielectric protects the intrinsic transistor early in the fabrication process. Three different gate stacks were studied: W/HfO 2, W/Al2O3, and W/HfO2/Ga 2O3. DC characterization showed transconductances of up to 215 mS/mm, maximum drain current densities of up to 960 mA/mm, and more than five orders of magnitude lower gate leakage current than in the conventional gate-last Ni/Au/Ni gate HEMTs. Capacitancevoltage measurements and pulsed-IV characterization show no hysteresis for the W/HfO2/Ga 2O3 capacitors and low interface traps. These W/high-k dielectric gates are an enabling technology for self-aligned AlGaN/GaN HEMTs, where the gate contact acts as a hard mask to the ohmic deposition. © 2009 IEEE.
Author supplied keywords
Cite
CITATION STYLE
Saadat, O. I., Chung, J. W., Piner, E. L., & Palacios, T. (2009). Gate-first AlGaN/GaN HEMT technology for high-frequency applications. IEEE Electron Device Letters, 30(12), 1254–1256. https://doi.org/10.1109/LED.2009.2032938
Register to see more suggestions
Mendeley helps you to discover research relevant for your work.