High-frequency mechanical spectroscopy with an atomic force microscope

Abstract

In this article we further develop local mechanical spectroscopy and extend the frequency range over which it can be used. Using a heterodyne method to measure the deflection of the cantilever enables one to measure the probe vibration at any frequency. Since the detection sensitivity of force gradients follows a f2 dependence, extending the frequency range from 1 to more than 5 MHz increases the sensitivity by over an order of magnitude. This setup is combined with a realistic model of the cantilever taking into account the geometry of the cantilever. The model is presented and discussed, and compared with experimental behavior measured on WC-Co and NiTi-epoxy samples. Experimental moduli of 730±50 and 260±40 GPa are obtained for WC and Co, respectively. © 2001 American Institute of Physics.