Thermal-softening properties and cooling set of water-saturated bamboo within proportional limit

18Citations
Citations of this article
12Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

Thermal-softening properties and cooling set of water-saturated bamboo were investigated using stressrelaxation measurements in heating and cooling processes, followed by residual deflection measurement. In the heating process, an obvious decrease in relative relaxation modulus due to thermal-softening of lignin was found at around 60°C. On the other hand, no clear change in the relative relaxation modulus was recognized in the cooling process. After the cooling process, about 65% and 75% of residual set was measured when the specimen was loaded on the epidermis and endodermis side, respectively. Also, residual set depended on the maximum temperature reached in the heating process and the unloaded temperature in the cooling process. From these results, it was deduced that the glass transition of lignin from the rubbery to glassy state is important to fix the deformation. Comparing thermal-softening behavior between bamboo and wood, the relative relaxation modulus of wood decreased steeply at higher temperatures than for bamboo. On the other hand, while about 75% of residual set was also found for wood, almost the same as for bamboo, the recovery of deformation with time was larger for wood than for bamboo. © 2008 The Japan Wood Research Society.

Cite

CITATION STYLE

APA

Nakajima, M., Furuta, Y., & Ishimaru, Y. (2008). Thermal-softening properties and cooling set of water-saturated bamboo within proportional limit. Journal of Wood Science, 54(4), 278–284. https://doi.org/10.1007/s10086-008-0952-x

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free