Highly Nanoporous Nickel Foam as Current Collectors in 3D All-Solid-State Microsupercapacitors

Abstract

This study reports a streamlined method for producing a highly nanoporous current collector with a substantial specific surface area, serving as an electrode for microsupercapacitors (MSCs). Initially, commercial Ni foams are patterned into an interdigitated structure by laser cutting. Subsequently, the Ni foams are infused with NiO nanopowders through dip coating, sintering, and reduction in an H2 atmosphere, followed by the growth of MnO2 through a redox reaction. The incorporation of NiO within this three-dimensional Ni current collector results in notable porosity within the range of approximately 200-600 nm. Such a 3D, highly nanoporous electrode dramatically increases the specific surface area by 30 times and substantially boosts the amount of active material deposition, surpassing those of commercially available Ni foams. Performance evaluations of this highly nanoporous electrode in a 1 M KOH solution demonstrate an areal capacity of 19.3 F/cm2, retaining more than 95% capacitance at 5 mA/cm2, and exhibiting an energy density of 671 μW h/cm2, 25 times greater than commercial Ni foams. Moreover, in the realm of solid-state applications for MSCs, the remarkably high porous electrode achieves a commendable areal capacity of 7.22 F/cm2 and an energy density of 263.9 μW h/cm2, rendering it exceptionally suitable for use in MSC applications.