α-Fe layer formation during metal dusting of iron in CO-H 2-H2O gas mixtures

12Citations
Citations of this article
8Readers
Mendeley users who have this article in their library.
Get full text

Abstract

The formation of an α-Fe layer between cementite and graphite was observed and investigated during metal dusting of iron in CO-H 2-H2O gas mixtures at both 600°C and 700°C. The condition to form this phenomenon is determined by the gas composition which depends on temperature. The iron layer formation was observed for CO content less than 1 % at 600°C and less than 5 % at 700°C. With increasing CO contents, no α-Fe layer was detected at the cementite/graphite interface by optical microscopy. In this case cementite directly contacts with the coke layer. The morphologies of the coke formed in the gas mixtures with low CO contents were also ana lysed. Three morphologies of graphite have been identified with 1 % CO at 600°C: filamentous carbon, bulk dense graphite with columnar structure, and graphite particle clusters with many fine iron containing particles embedded inside. At 700°C with 5 % CO the coke mainly consists of graphite particle clusters with some filamentous carbon at the early stage of reaction. Coke analysis by X-ray diffraction shows that both α-Fe and Fe3C are present in the coke. The mechanism of α-Fe accumulation between cementite and graphite is discussed in this paper.

Cite

CITATION STYLE

APA

Zhang, J., Schneider, A., & Inden, G. (2003). α-Fe layer formation during metal dusting of iron in CO-H 2-H2O gas mixtures. Materials and Corrosion, 54(10), 763–769. https://doi.org/10.1002/maco.200303740

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free