Chemically induced compaction bands: Triggering conditions and band thickness

Abstract

During compaction band formation, various mechanisms can be involved at different scales. Mechanical and chemical degradation of the solid skeleton and grain damage are important factors that may trigger instabilities in the form of compaction bands. Here we explore the conditions of compaction band formation in quartz- And carbonate-based geomaterials by considering the effect of chemical dissolution and grain breakage. As the stresses/deformations evolve, the grains of the material break, leading to an increase of their specific surface. Consequently, their dissolution is accelerated and chemical softening is triggered. By accounting for (a) the mass diffusion of the system, (b) a macroscopic failure criterion with dissolution softening, and (c) the reaction kinetics at the microlevel, a model is proposed and the conditions for compaction instabilities are investigated. Distinguishing the microscale (grain level) from the macrolevel (representative elementary volume) and considering the heterogeneous microstructure of the representative elementary volume, it is possible to discuss the thickness and periodicity of compaction bands. Two case studies are investigated. The first one concerns a sandstone rock reservoir which is water flooded and the second one a carbonate rock in which CO2 is injected for storage. It is shown that compaction band instabilities are possible in both cases. © 2014. American Geophysical Union.