Coagulation characteristics of polyaluminum chlorides PAC-Al30 on humic acid removal from water

124Citations
Citations of this article
64Readers
Mendeley users who have this article in their library.
Get full text

Abstract

Coagulants polyaluminum chlorides with a high Al30 content (PAC-Al30) were prepared in laboratory, and the aluminum hydrolysis ratios (B = [OH-]/[Al3+]) of PAC-Al30 were 1.2, 1.8 and 2.4 respectively. Coagulation behaviors of PAC-Al30 with different B values and conventional coagulant AlCl3 were compared by jar test to remove humic acid (HA) from water. Floc growth, charge neutralization capacity, HA removal and residual aluminum concentration in the purified water were investigated. The influences of initial pH and coagulant dosage on coagulation behaviors were considered. The results show that coagulants PAC-Al30 exhibit much stronger floc formation capacity, have broader effective dosage range and initial pH range, reach higher HA removal efficiency, and get lower residual aluminum concentration than AlCl3 does. The coagulation/flocculation capacity of PAC-Al30 increases with the B value. The HA removal reaches 98.5% at an initial pH of 7.0 and PAC-Al30 (B = 2.4) dosage of 0.16 mmol L-1 (total aluminum concentration, Alt) when the initial HA concentration is 10 mg L-1; the residual aluminum in the purified water is 0.066 mg L-1. Al30 is verified as highly efficient coagulation/flocculation species for HA removal. © 2008 Elsevier B.V. All rights reserved.

Cite

CITATION STYLE

APA

Zhang, P., Wu, Z., Zhang, G., Zeng, G., Zhang, H., Li, J., … Dong, J. (2008). Coagulation characteristics of polyaluminum chlorides PAC-Al30 on humic acid removal from water. Separation and Purification Technology, 63(3), 642–647. https://doi.org/10.1016/j.seppur.2008.07.008

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free