Advances in EUV light sources

Abstract

Extreme ultraviolet (EUV) lithography has emerged as the preferred choice for high-volume manufacturing, now that immersion ArF reaches its limits. Light source power is a key driver to achieve the throughput required for successful adoption of extreme ultraviolet lithography (EUVL). Cymer has developed a laser-produced plasma source based on a high-power CO 2 drive laser exciting tin targets to emit 13.5 nm light. Five sources are currently installed at chipmaker fabs and are being used for process development. The power output of the fielded source configuration is currently 20 W, lower than required for manufacturing introduction. The technology for scaling up power is under development, focusing on increasing the conversion efficiency and collection efficiency of the source. Increasing drive laser power to 17 kW has allowed the demonstration of EUV power of nearly 50 W, with paths identified for further scaling to 100 W. An additional focus on product reliability has driven the availability up to 70%, primarily through extending the collector mirror lifetime.