Aspects of residual thermal stresses in continuous-fibre-reinforced ceramic matrix composites

Abstract

An analytical model is presented that predicts the thermal stresses which arise from mismatch in coefficients of thermal expansion between a fibre and the surrounding matrix in a continuous fibre composite. The model consists of two coaxial isotropic cylinders. Stress transfer between the fibre and the matrix near an unstressed free surface has been modelled by means of a shear-lag analysis. Away from the free surface the theoretical approach satisfies exactly the conditions for equilibrium and continuity of stress at the fibre-matrix interface. Application of the model to a composite consisting of a glass-ceramic calcium alumino-silicate (CAS) matrix containing unidirectional Nicalon fibres points to a strong dependence of stress on fibre volume fraction. Surface effects are significant for depths of the order of one fibre diameter. Near-surface shear stresses resulting from cooling from the stress-free temperature are sufficiently high to suggest that a portion of fibre close to the surface is debonded at room temperature. Experimental results acquired with a scanning electron microscope (SEM) equipped with a heating stage are consistent with this prediction. Consequently, the model has been modified in a simple way to incorporate frictional slip at the interface, according to the Coulomb friction law. Although detailed measurements are limited by the resolution of the technique, experimental evidence suggests that the transfer length is within an order of magnitude of the model prediction. © 1993.