The Cell-in-Series Method: A Technique for Accelerated Electrode Degradation in Redox Flow Batteries

  • Pezeshki A
  • Sacci R
  • Veith G
  • et al.
61Citations
Citations of this article
108Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

© The Author(s) 2015. We demonstrate a novel method to accelerate electrode degradation in redox flow batteries and apply this method to the all-vanadium chemistry. Electrode performance degradation occurred seven times faster than in a typical cycling experiment, enabling rapid evaluation of materials. This method also enables the steady-state study of electrodes. In this manner, it is possible to delineate whether specific operating conditions induce performance degradation; we found that both aggressively charging and discharging result in performance loss. Post-mortem x-ray photoelectron spectroscopy of the degraded electrodes was used to resolve the effects of state of charge (SoC) and current on the electrode surface chemistry. For the electrode material tested in this work, we found evidence that a loss of oxygen content on the negative electrode cannot explain decreased cell performance. Furthermore, the effects of decreased electrode and membrane performance on capacity fade in a typical cycling battery were decoupled from crossover; electrode and membrane performance decay were responsible for a 22% fade in capacity, while crossover caused a 12% fade.

Cite

CITATION STYLE

APA

Pezeshki, A. M., Sacci, R. L., Veith, G. M., Zawodzinski, T. A., & Mench, M. M. (2016). The Cell-in-Series Method: A Technique for Accelerated Electrode Degradation in Redox Flow Batteries. Journal of The Electrochemical Society, 163(1), A5202–A5210. https://doi.org/10.1149/2.0251601jes

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free