Development and validation of a method for the determination of fatty acid methyl ester contents in tung biodiesel and blends

Abstract

The aimof this study was to develop and validate a method for the analysis of fatty acid methyl ester (FAMEs) content in tung biodiesel and blends with soybean biodiesel. The limits of detection (LOD) and quantification (LOQ), linearity, robustness, accuracy and precision were evaluated by using gas chromatography with mass spectrometry detection and impact electron ionization. The analytical curves showed correlation coefficients values higher than 0.99. The LOD and LOQ were 0.78 and 2.5 mg L -1 for all FAMEs, respectively. The values of accuracy were between 86 and 117%, with relative standard deviation lower than 8%. The method was applied to tung biodiesel and tung and soybean biodiesel blends in the following proportions: 15:85, 20:80, 25:75 (%v/v). All of them showed good performance. Since the method was also applied to soybean biodiesel, the efficiency of the method for the analysis of both pure tung biodiesel and blends with different raw materials was confirmed and the robustness of the method was evidenced. © AOCS 2011.