Characterization of DOM and disinfection by-products precursors in biological activated carbon filter backwash water from drinking water treatments

Abstract

Biological activated carbon filter backwash water (BAC FBW) removes pollutants from BAC filters in drinking water treatment plants. Characterizing the dissolved organic matter (DOM) in BAC FBW is of great significance for the recycling and treatment of backwash water. DOM pollution was monitored over a year using three-dimensional excitation–emission matrix fluorescence spectra. The dissolved organic carbon (DOC) concentration and fluorescence results showed that the DOC concentration reached the lowest value of 1.95 mg/L in the summer. The relative abundances of fluorescence components had a direct relationship with temperature variations. The soluble microbial products were enhanced greatly during cold seasons, while fulvic-acid-like and humic-acid-like compounds remained constant. Disinfection by-products (DBPs) formation potential and cytotoxicity were evaluated. The total haloacetonitriles (HANs), trihalomethanes (THMs), halonitromethanes (HNMs), and haloacetaldehyde (HALs) formation potentials ranged from 35.5 to 47.3 μg/L, 95.1 to 126 μg/L, 4.95 to 8.06 μg/L, and 43.4 to 53.0 μg/L in BAC FBW, respectively. Among all DBPs included in the calculation, the order of contribution to cytotoxicity was HANs > HALs > THMs > HNMs, respectively. Especially, HANs were much higher than the other DBPs, which should be controlled to avoid the biological risk of effluent quality.