Pervaporation of water-ethanol mixtures through poly-dimethylsiloxane block-copolymer membranes

Abstract

Pervaporation and sorption behavior of water-ethanol mixtures was investigated on block copolymers of polydimethylsiloxane (PDMS)-polysulfone (PS) and of PDMS-PS-poly(4-hydroxystyrene) (PHS) as well as on PDMS. The preferential permeation of ethanol through PDMS membranes was attributed to both the preferential sorption of ethanol and rather small differences in the diffusivities between ethanol and water components (6.4×10−6 and14×10−6 cm2s−1, respectively, at 25°C and an ethanol contentin the feed (xE) of 10 wt%). The block copolymers were considered to have microphase-separated structures, of which the continuous PDMS phase practically contributed to the permeation. The high sorption in the block copolymers was mainly attributed to the disperse phases and contributed little to the permeation. PDMS-PS-PHS block copolymers having PDMS weight fraction (wPDMS) of 0.6–0.7 showed permeabilities as high as commercial silicone rubber (wPDMS=0.7) and a little lower selectivity of pervaporation (αp=7.7 at xE=10 wt%) as compared with that of PDMS (αp=8.8–9.4). They were superior to PDMS-PS block copolymers (wPDMS=0.5–0.6) as for boththe selectivity and the permeability. Composite membranes comprising a uniform ultrathin layer of a PDMS-SP-PHS block copolymer on a microporous support had fairly high performance (the permeation rate of 4.5 kg m−2h−1 and αp=6.8) and durability in the pervaporation of a dilute ethanol solution. © 1987 The Society of Polymer Science, Japan. All rights reserved.