Characterization of porcelain tableware formulation containing bentonite clay

Abstract

Aluminosilicate are often produced from kaolin with a kaolin bond in the formulation intended to increase the thermal strength of the product. Because kaolin formulations do not sinter well, investigation of methods for increasing the density of kaolin is highly relevant. The density can be increased by increasing the degree of dispersion. An additive which improves sinterability would be especially effective. Bentonite with its high plasticity and reactive surface meets these requirements to a certain extent. Four formulations of the porcelain tableware were prepared in different percentage from 0 to 15 wt.% of calcic bentonite. The mass loss and shrinkage of different formulations were measured by using the following thermal analysis such as: Differential thermal analysis (DTA), thermal gravimetric analysis (TGA) and dilatometric analysis. Its density, water absorption, total porosity and the flexural strength were also measured at different temperatures between 1250 and 1400°C. It was found that the bentonite added to the formulation increases the strength of the product and reduces the total porosity to 3.35% by increasing the degree of dispersion during the grinding of the components, thereby improving the sintering process of the formulation. On one hand, the weight loss, shrinkage and sintering time were decreased. On the other hand, the thermal resistance and flexural strength were increased at 1380°C for 10 wt.% of bentonite content.