Evaluating UAVs for Non-Directional Beacon Calibration: A Cost-Effective Alternative to Manned Flight Inspections

Abstract

The increasing demand for efficient aviation navigation system inspections has led to the use of Unmanned Aerial Vehicles (UAVs) as a flexible and cost-effective alternative to traditional manned aircraft. This study emphasizes the operational advantages of UAVs in transforming flight inspections, including Non-Directional Beacon (NDB) calibration. Following the successful performance evaluation of an NDB system in Banská Bystrica, Slovakia, using a manned aircraft, a UAV was deployed on the same flight path to validate its ability to replicate the procedure in terms of trajectory only, without performing any signal measurement. The UAV maintained accurate flight paths and continuous communication throughout the mission. A specialized rotatory system, operating at 868 MHz, enabled real-time tracking and ensured stable communication over long distances. The manned aircraft test revealed a maximum bearing deviation of 13.47° at 3.37 NM and a minimum received signal strength of −90 dBm, which approaches the ICAO threshold for en route navigation (±10°) but remains usable for diagnostic purposes. The UAV flight did not include signal capture but successfully completed the 40 NM profile with a circular error probable (CEP95) of 2.8 m and communication link uptime of 99.8%, confirming that the vehicle can meet procedural trajectory fidelity. These findings support the feasibility of UAV-based NDB inspections and provide the foundation for future test phases with onboard signal monitoring systems.