Abstract
In this paper, a new dense dielectric (DD) patch array antenna prototype operating at 28 GHz for future fifth generation (5G) cellular networks is presented. This array antenna is proposed and designed with a standard printed circuit board process to be suitable for integration with radio frequency/microwave circuitry. The proposed structure employs four circular-shaped DD patch radiator antenna elements fed by a 1-to-4 Wilkinson power divider. To improve the array radiation characteristics, a ground structure based on a compact uniplanar electromagnetic bandgap unit cell has been used. The DD patch shows better radiation and total efficiencies compared with the metallic patch radiator. For further gain improvement, a dielectric layer of a superstrate is applied above the array antenna. The measured impedance bandwidth of the proposed array antenna ranges from 27 to beyond 32 GHz for a reflection coefficient (S11) of less than-10 dB. The proposed design exhibits stable radiation patterns over the whole frequency band of interest, with a total realized gain more than 16 dBi. Due to the remarkable performance of the proposed array, it can be considered as a good candidate for 5G communication applications.
Author supplied keywords
Cite
CITATION STYLE
Haraz, O. M., Elboushi, A., Alshebeili, S. A., & Sebak, A. R. (2014). Dense dielectric patch array antenna with improved radiation characteristics using ebg ground structure and dielectric superstrate for future 5G cellular networks. IEEE Access, 2, 909–913. https://doi.org/10.1109/ACCESS.2014.2352679
Register to see more suggestions
Mendeley helps you to discover research relevant for your work.