Bacterial contamination of anaesthetic gases

16Citations
Citations of this article
5Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

The bacterial content of oxygen and nitrous oxide immediately before and after passing through clean and used breathing systems (circuits) was measured using a specially constructed agar chamber (Bourdillon's slit sampler). The content per litre of oxygen from the outlet of the anaesthetic machine was 4.0 × 10-2, and 2.9 × 10-2 for nitrous oxide, corresponding to 3.5 × 10-2 for a 50% mixture of the gases. After passing through cleaned circuits, the bacterial pollution of the gas mixture had increased by 30%, but more than elevenfold after passing through used circuits. The content from cleaned circuits was less than that measured previously in the air of hospital wards and operating theatres, whereas gases from used circuits were polluted to approximately the same extent. It is concluded that used circuits may increase the risk of cross-infection. The cleaning method employed by us (dish-washer-hot air drying) appeared to be acceptable. © 1978 Macmillan Journals Ltd.

Cite

CITATION STYLE

APA

Nielsen, H., Vasegaard, M., & Stokke, D. B. (1978). Bacterial contamination of anaesthetic gases. British Journal of Anaesthesia, 50(8), 811–814. https://doi.org/10.1093/bja/50.8.811

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free