Abstract
Assembling nanostructured building blocks into network materials unlocks macroscopic properties inaccessible with monolithic solids, notably toughness and tolerance to electrochemical alloying. A method is reported for large-scale, continuous synthesis of silicon nanowires (SiNWs) suspended in the gas phase and their direct assembly into macroscopic sheets. Performing gas-phase growth of SiNWs through floating catalyst chemical vapor deposition using an aerosol of gold nanoparticles eliminates the need for substrates, increasing the growth rate by a factor of 500, reaching 1.4 μm s-1 and leading to very long SiNWs. The combined high aspect ratio (>210) and large concentration of SiNWs in the gas-phase (1.5 × 107 cm-3) enable the formation of macroscopic solids solely composed of percolated SiNWs, such as free-standing sheets and continuous metre-long SiNW tapes. Sheet samples of small diameter SiNWs (<25 nm) combine extraordinary flexibility in bending, tensile ductility around 3%, and over 50-fold higher toughness than Si-based anodes (fracture energy 0.18 ± 0.1 J g-1). This synthesis and assembly process should be applicable to virtually any one-dimensional inorganic nanomaterial producible by thermochemical methods. This journal is
Cite
CITATION STYLE
Schäufele, R. S., Vazquez-Pufleau, M., & Vilatela, J. J. (2020). Tough sheets of nanowires produced floating in the gas phase. Materials Horizons, 7(11), 2978–2984. https://doi.org/10.1039/d0mh00777c
Register to see more suggestions
Mendeley helps you to discover research relevant for your work.