Plug-and-Play Microphones for Recording Speech and Voice with Smart Devices

1Citations
Citations of this article
8Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

Introduction: Smart devices are widely available and capable of quickly recording and uploading speech segments for health-related analysis. The switch from laboratory recordings with professional-grade microphone setups to remote, smart device-based recordings offers immense potential for the scalability of voice assessment. Yet, a growing body of literature points to a wide heterogeneity among acoustic metrics for their robustness to variation in recording devices. The addition of consumer-grade plugand- play microphones has been proposed as a possible solution. The aim of our study was to assess if the addition of consumer-grade plug-and-play microphones increases the acoustic measurement agreement between ultra-portable devices and a reference microphone. Methods: Speech was simultaneously recorded by a reference high-quality microphone commonly used in research and by two configurations with plug-and-play microphones. Twelve speechacoustic features were calculated using recordings from each microphone to determine the agreement intervals in measurements between microphones. Agreement intervals were then compared to expected deviations in speech in various neurological conditions. Each microphone fs response to speech and to silence was characterized through acoustic analysis to explore possible reasons for differences in acoustic measurements between microphones. The statistical differentiation of two groups, neurotypical and people with multiple sclerosis, using metrics from each tested microphone was compared to that of the reference microphone. Results: The two consumer-grade plug-andplay microphones favored high frequencies (mean center of gravity difference ≥ +175.3 Hz) and recorded more noise (mean difference in signal to noise ≤ -4.2 dB) when compared to the reference microphone. Between consumergrade microphones, differences in relative noise were closely related to distance between the microphone and the speaker fs mouth. Agreement intervals between the reference and consumer-grade microphones remained under disease-expected deviations only for fundamental frequency (f0, agreement interval ≤0.06 Hz), f0 instability (f0 CoV, agreement interval ≤0.05%), and tracking of second formant movement (agreement interval ≤1.4 Hz/ms). Agreement between microphones was poor for other metrics, particularly for fine timing metrics (mean pause length and pause length variability for various tasks). The statistical difference between the two groups of speakers was smaller with the plug-and-play than with the reference microphone. Conclusion: Measurement of f0 and F2 slope was robust to variation in recording equipment, while other acoustic metrics were not. Thus, the tested plug-and-play microphones should not be used interchangeably with professional-grade microphones for speech analysis. Plugand- play microphones may assist in equipment standardization within speech studies, including remote or selfrecording, possibly with small loss in accuracy and statistical power as observed in the current study.

Cite

CITATION STYLE

APA

Noffs, G., Cobler-Lichter, M., Perera, T., Kolbe, S. C., Butzkueven, H., Boonstra, F. M. C., … Vogel, A. P. (2024). Plug-and-Play Microphones for Recording Speech and Voice with Smart Devices. Folia Phoniatrica et Logopaedica, 76(4), 372–385. https://doi.org/10.1159/000535152

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free