Gas Source Localization via Behaviour Based Mobile Robot and Weighted Arithmetic Mean

4Citations
Citations of this article
24Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

This work is concerned with the localization of gas source in dynamic indoor environment using a single mobile robot system. Algorithms such as Braitenberg, Zig-Zag and the combination of the two were implemented on the mobile robot as gas plume searching and tracing behaviours. To calculate the gas source location, a weighted arithmetic mean strategy was used. All experiments were done on an experimental testbed consisting of a large gas sensor array (LGSA) to monitor real-time gas concentration within the testbed. Ethanol gas was released within the testbed and the source location was marked using a pattern that can be tracked by a pattern tracking system. A pattern template was also mounted on the mobile robot to track the trajectory of the mobile robot. Measurements taken by the mobile robot and the LGSA were then compared to verify the experiments. A combined total of 36.5 hours of real time experimental runs were done and the typical results from such experiments were presented in this paper. From the results, we obtained gas source localization errors between 0.4m to 1.2m from the real source location.

Cite

CITATION STYLE

APA

Ali Yeon, A. S., Kamarudin, K., Visvanathan, R., Syed Zakaria, S. M. M., Zakaria, A., & Kamarudin, L. M. (2018). Gas Source Localization via Behaviour Based Mobile Robot and Weighted Arithmetic Mean. In IOP Conference Series: Materials Science and Engineering (Vol. 318). Institute of Physics Publishing. https://doi.org/10.1088/1757-899X/318/1/012049

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free