Broadband 300-GHz Power Amplifier MMICs in InGaAs mHEMT Technology

83Citations
Citations of this article
29Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

In this article, we report on compact solid-state power amplifier (SSPA) millimeter-wave monolithic integrated circuits (MMICs) covering the 280-330-GHz frequency range. The technology used is a 35-nm gate-length InGaAs metamorphic high-electron-mobility transistor (mHEMT) technology. Two power amplifier MMICs are reported, based on a compact unit amplifier cell, which is parallelized two times using two different Wilkinson power combiners. The Wilkinson combiners are designed using elevated coplanar waveguide and air-bridge thin-film transmission lines in order to implement low-loss 70-Ω lines in the back-end-of-line of this InGaAs mHEMT technology. The five-stage SSPA MMICs achieve a measured small-signal gain around 20 dB over the 280-335-GHz frequency band. State-of-the-art output power performance is reported, achieving at least 13 dBm over the 286-310-GHz frequency band, with a peak output power of 13.7 dBm (23.4 mW) at 300 GHz. The PA MMICs are designed for a reduced chip width while maximizing the total gate width of 512 μm in the output stage, using a compact topology based on cascode and common-source devices, improving the output power per required chip width significantly.

Cite

CITATION STYLE

APA

John, L., Tessmann, A., Leuther, A., Neininger, P., Merkle, T., & Zwick, T. (2020). Broadband 300-GHz Power Amplifier MMICs in InGaAs mHEMT Technology. IEEE Transactions on Terahertz Science and Technology, 10(3), 309–320. https://doi.org/10.1109/TTHZ.2020.2965808

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free