Mechanical, machinability and water absorption properties of novel kenaf fiber, glass fiber and graphene composites reinforced with epoxy

Abstract

This paper aims to fabricate a novel kenaf fiber, glass fiber, graphene composite reinforced with epoxy, and to study its water absorption, mechanical and machining properties. Natural fiber composites seek numerous applications nowadays due to its high strength is to weight ratio, high impact resistance, thermal stability, and recyclability. The literature study on natural fiber composites indicates lack of research on Kenaf fibers reinforced with E-glass fibers in conjunction with 0.5% and 1.0% of graphene. Hence, this research focuses on Kenaf fiber with percentage composition of graphene was varied as 0.5%, and 1.0%, by weight of the holding matrix and with/without incorporation of glass fiber. Suitable surface modifications were done by treating natural fibres by 0.5% NaOH for better adhesion of fibre and epoxy resin. Sonication and Cetyl trimethyl ammonium bromide (CTAB) treatments were also done to realize the fine scattering of graphene in the epoxy matrix in order to achieve better mechanical behaviour. Moulds were prepared as per D-638 ASTM standards. The treated fibres were then arranged in the mould by the conventional hand layup technique. The main objectives of this study are to conduct tensile, flexural, Impact, water absorption, machinability, and FTIR test. Result shows that the incorporation of graphene in natural fiber composites showed an increase in tensile strength, flexural strength, and water absorption properties by 27.7%, 53%, and 15% on average, respectively. The composites used in this research find their use in potential applications such as defence, biomedical aids, automobiles, packaging, actuators, etc. These often generate great interest, whenever there is a demand for fabricating lightweight and high strength material.