Tensile strength and failure types of direct and indirect resin composite copings for perio-overdentures luted using different adhesive cementation modalities

Abstract

Perio-overdenture design helps to reduce periodontal diseases and secondary caries on abutment teeth. Composite copings can be cemented adhesively to the abutment teeth with different techniques. In this study, direct/indirect resin composite copings for perio-overdentures, luted using different adhesive cementation modalities were compared. Human teeth (N = 40) were prepared to receive spherical attachment copings and randomly divided into four groups: (1) resin-composite copings bonded directly (DC), (2) composite copings made indirectly, luted with dual-polymerized resin cement (ICV), (3) composite copings made indirectly, bonded with resin composite (ICT), (4) composite copings made indirectly, bonded with resin composite after the immediate dentin sealing method (IDS). Specimens were tested for tensile failure and one-way ANOVA (alpha = 0.05) was performed and the two-parameter Weibull modulus, scale (m) and shape (0) were calculated. Mean tensile load (N) was significantly higher for Group IDS (238 ± 81) than for the other groups (144 ± 53-184 ± 46) (p < 0.05). Group IDS (0.54 ± 0.25 mm) showed significantly higher deformation (mm) than other groups (0.2 ± 0.1-0.32 ± 0.15) (p < 0.05). Weibull distribution presented lower shape (0) for DC (3.33) compared to other groups (3.57-4.99). Cohesive coping failures were more frequent in Group IDS (60%) and mixed failures in other groups (40-60%). In conclusion, IDS copings could be preferred over other fabrication and adhesion modalities.