Shear behaviour of peat at different stress levels

4Citations
Citations of this article
30Readers
Mendeley users who have this article in their library.
Get full text

Abstract

Consolidated undrained triaxial compression tests were conducted from 1.65 m depth subjected to stress levels of 10.4-40.5 kPa. The results showed that most test data failed to reach the tension cut-off line (q/p′ = 3). For peat, the membrane correction effect on peat shear resistance was strain dependent - generally small within 10% shear strain, but significant above 10% shear strain. A critical state line for peat was determined based on the maximum curvature approach. Of the data recorded for peat, 78% fell within the range 30-60°, increasing to 90.4% when ignoring points lower than 10 kPa. Organic content (OC) also had an effect on the shear behaviour. For OC > 75%, the deviator stress behaved like an organic soil; otherwise, the peat behaved more like a mineral soil. In peat samples with OC > 75%, the direct shear box test gives higher estimates of shear strength than the triaxial shear test, but which are not necessarily accurate - the mechanism of direct shear acts only at the centre of a specimen, while triaxial shear can shear throughout the specimen.

Cite

CITATION STYLE

APA

Wang, D., & Li, Z. (2023). Shear behaviour of peat at different stress levels. Proceedings of the Institution of Civil Engineers: Geotechnical Engineering, 177(6), 660–673. https://doi.org/10.1680/jgeen.22.00058

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free