Theoretical and numerical analysis of the behavior of ions injected into a quadrupole ion trap mass spectrometer

Abstract

A numerical simulation method has been developed for the analysis of trapping ions injected into an ion trap mass spectrometer. This method was applied to clarify the effects of the following parameters on trapping efficiencies: (1) initial phase of the radio frequency (RF) drive voltage, (2) ion injection energy, and (3) RF peak voltage while injecting ions. The following conclusions were obtained by theoretical and simulation approaches. 1. The second and third dominant oscillations contribute significantly to the trapping mechanism of the injected ions, even for low q values. 2. A formula relating the operating parameters, which gives the maximum trapping efficiency, is derived. 3. Based on the above-mentioned formula, an advanced injection method is proposed, in which the RF peak voltage is decreased while injecting ions. The ability of this method to solve the problem of unequal sensitivity among different ion species is indicated by numerical simulation. Copyright (C) 2000 John Wiley and Sons, Ltd.