A broadband second-order bandpass frequency selective surface for microwave and millimeter wave application

Abstract

This paper presents a frequency selective surface (FSS) with a wideband second-order bandpass response in the dual-band of microwave and millimeter wave. The overall structure consists of three layers of metal pattern and two layers of thin dielectric substrate. The top and bottom metal layers have capacitive patches with integrated curled Jerusalem cross slot resonators, while the intermediate metal layer has an inductive grid structure with cross-shaped slot resonators. The incorporated slot resonators play a pivotal role in achieving the desired transmission poles or zeros, which enable a wideband second-order filtering response in the dual-band and a quick roll-off at the passband edges, increasing the efficacy of electromagnetic shielding. To fully investigate the structure's frequency response, an equivalent circuit model of the structure is created, spanning the complete frequency range of 5–50 GHz. Physical samples are created and measured to confirm the suggested approach’s efficacy. The passband center frequencies of the FSS are found at f1 = 19.42 GHz and f2 = 42.78 GHz, and the − 3 dB bandwidth is 4.34 GHz (17.25–21.59 GHz) and 8.54 GHz (38.51–47.05 GHz), respectively. The simulation results align well with the experimental data. The transmission response rapidly transitions from the passband to the stopband at the passband boundaries.